Alpha 100 Device Firmware
Σελίδα 1 από 1
Alpha 100 Device Firmware
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of August 11, 2017
Notes:
Notes for France users only: To enable use of channels 3-6 for the T5/TT15, ensure the T5/TT15 software is updated (see T5 TT15 Updates and Downloads). Then remove the T5/TT15 from the Alpha100 dog list, then re-pair it to the Alpha100.
Notes for France users only: Once channel 3-6 capability is added and activated on a T5/TT15 collar, you will not be able to pair the collar to an Alpha50 or Alpha100 that has not been upgraded to this capability. For complete compatibility, update all T5, TT15, Alpha100 and Alpha50 units. Units purchased as T5F, TT15F, Alpha100F and Alpha50F already have this capability.
Important Notes for HD BarkDetect: This is available in Norway, Sweden, Finland and Denmark and is an Alpha 100-only feature (operation with the Astro320 is not affected). HD BarkDetect requires an update to the T5/TT15 Dog Device (see T5 TT15 Updates and Downloads).
To enable HD BarkDetect on the T5/TT15, go to that Dog Device's Info page and select 'Bark Sensitivity' from the menu. Select a sensitivity to send to the Dog Device. The Dog Device will start transmitting HD Bark Detection information.
NOTE: Once a T5 or TT15 Dog Device is in HD Bark Detection mode, it can only be tracked in Alpha mode by Alpha 100's with software version 5.40 or greater.
Astro320 tracking is not affected by HD BarkDetect selection.
WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin® for service.
Change History
Changes made from version 6.30 to 6.50:
Improved rejection of an unintended collar that has a track-only code that overlaps with that of an intended collar.
Prevent unconfirmed change ID of a collar by disabling this option until the collar is reliably tracking.
Improved enumeration of USB mass storage.
Eliminated occasional false lost-GPS message at the start of collar tracking.
France users only: Added channels 3-6. Update your collar and other handheld devices for complete compatibility.
France users only: Use letters in the share codes to allow more unique identification of collars to reduce the possibility of tracking an unintended collar.
Changes made from version 6.20 to 6.30:
Added an option to the map option menu to show and hide the map pointer.
Fixed potential invalid distances of dogs displayed by Drive Track or Fenix.
Changes made from version 6.10 to 6.20:
Improved interference handling by replacing the interference wizard with a simple interference information banner.
Improved consistency of dogs displayed by Drive Track or Fenix.
Fixed issue when a dog is removed from the dog list, especially in basestation mode.
Changes made from version 6.00 to 6.10:
Fixes battery charging.
Changes made from version 5.90 to 6.00:
Improved notification when a dog unit has lost-GPS.
Changes made from version 5.60 to 5.90:
Added broadcast of dog data (Setup > Dogs > Broadcast Dog Data > On) to support dog position tracking by [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.] and [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.].
Changes made from version 5.60 to 5.80:
Added broadcast of dog data (Setup > Dogs > Broadcast Dog Data > On) to support dog position tracking by DriveTrack 70 and fēnix 3.
Changes made from version 5.40 to 5.60:
Improved the display of the blue pin on the map page.
Made contact messages persistent.
Added an alert tone when emergency messages are received from a contact (system tones must be enabled).
Improved interference detection.
Changes made from version 5.30 to 5.40:
Fixed issues when adding 20 dogs or contacts.
Added HD BarkDetect for units for Norway, Sweden, Finland and Denmark (see notes above).
Changes made from version 5.10 to 5.30:
Fixed issue with radio function in Belgian units.
Changes made from version 5.00 to 5.10:
Improved tracking of a collar that is shared between 2 dogs.
Don't show Collar Sleep Mode option for a T5 mini or TT15 mini that is manually added as a track-only collar.
Fixed +/- buttons on the compass page.
Changes made from version 4.70 to 5.00:
Added support for T5 mini and TT15 mini.
Improved pairing reliability.
Improved dog info page menu options ordering.
Improved display of running pointers on the dog tracker page.
Improved consistency of comm bar display on the dog info page.
Fixed potential issue where Emergency Call button was covered up on the contacts page.
Fixed potential freeze during Start New Hunt.
Fixed potential shutdown when using the data fields dashboard on the map.
Changes made from version 4.50 to 4.70:
Fixed issue when adjustment screen is displayed multiple times.
Improved handling of invalid .JNX files.
Changes made from version 4.40 to 4.50:
Improved pairing to ANT sensors.
Fixed potential issue when setting a geofence alert.
Improved compass page's transition between magnetic compass and direction-of-travel for heading.
Made time-based track interval setting accept intervals less than 30 seconds.
Changes made from version 4.30 to 4.40:
Added a new dog device tracking channel for Greece units. NOTE: the T 5 or TT 15 dog device must have version 2.50 or later software installed to use this new channel.
Fixed issues when deleting waypoints.
Fixed issues when using all 20 available tracking windows for dog devices and Alpha tracking.
Changes made from version 4.20 to 4.30:
Fixed occasional shutdown when using the map page.
Changes made from version 4.10 to 4.20:
Improved cartography support (Garmin Hunt View maps)
Improved boot time when a large amount of BirdsEye satellite imagery is present
Changes made from version 4.00 to 4.10:
Fixed possible issue with 4.00 release
Changes made from version 3.80 to 4.00:
Fixed possible issue with List Sync on dog tracker page
Changes made from version 3.70 to 3.80:
Assigns correct features for wirelessly shared dog devices.
Improved reliability of received dog device position and status.
Fixed adjustability of L/M/H stim mode slider.
Improved reliability when changing ID of a dog device
Changes made from version 3.20 to 3.70:
Added support for T 5 and TT 15 dog devices.
Added Emergency Calling feature between Alphas
Added the ability to control a VIRB through a T5 or TT15 within tracking distance. The VIRB must be near the T5 or TT15 and have Remote turned on and set to 'Main VIRB' in its settings (Main Menu > Setup > Remote). To use the feature on Alpha 100, go to Dog List > select a dog > Show Info > Menu > VIRB Control.
Fixed potential issues with stale tracking data if dog device is out of tracking range.
Fixed dog arrow orientation when map is in track up mode.
Changes made from version 3.10 to 3.20:
Disabled dog tracking when used in countries for which the radio frequencies are not authorized.
Fixed distance issue in dog track review.
Improvements to map drawing speed.
Fixed issue retrieving Public Land Survey System data from certain TOPO US 24K maps.
Changes made from version 3.00 to 3.10:
Fixed potential shutdown with large number of dogs on dog tracker page.
Changes made from version 2.90 to 3.00:
Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
Added indicator on the map when a dog or contact has lost communication
Improved to show other dogs when reviewing a dog's track on the map
Fixed issue where setting a track to show on the map would not hold through a power cycle
Fixed issue where pausing all tracking would not prevent track points from being logged
Changes made from version 2.80 to 2.90:
Improve charging of a fully-depleted battery.
Changes made from version 2.70 to 2.80:
Prevent transmitting when no battery is installed.
Changes made from version 2.40 to 2.70:
Improve ability to drive accessory antennas.
Improvements to position reporting.
Changes made from version 2.30 to 2.40:
Added 'List Sync' option on the dog compass page. For multiple dog situations, this mode matches visible training dogs to visible tracking dogs.
Added 'Measure Distance' option on the map page.
Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
Improved support for tracking greater than 15 dogs.
Fixed issue when setting up a user grid position format.
Fixed issue when navigating to a dog when routing is set to 'Prompted'.
Changes made from version 2.20 to 2.30:
Improved Compass autocalibration.
Fixed mark covey to correctly display numbers greater than nine.
Fixed potential shutdown when attempting to add a new geofence.
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of August 11, 2017
Notes:
Notes for France users only: To enable use of channels 3-6 for the T5/TT15, ensure the T5/TT15 software is updated (see T5 TT15 Updates and Downloads). Then remove the T5/TT15 from the Alpha100 dog list, then re-pair it to the Alpha100.
Notes for France users only: Once channel 3-6 capability is added and activated on a T5/TT15 collar, you will not be able to pair the collar to an Alpha50 or Alpha100 that has not been upgraded to this capability. For complete compatibility, update all T5, TT15, Alpha100 and Alpha50 units. Units purchased as T5F, TT15F, Alpha100F and Alpha50F already have this capability.
Important Notes for HD BarkDetect: This is available in Norway, Sweden, Finland and Denmark and is an Alpha 100-only feature (operation with the Astro320 is not affected). HD BarkDetect requires an update to the T5/TT15 Dog Device (see T5 TT15 Updates and Downloads).
To enable HD BarkDetect on the T5/TT15, go to that Dog Device's Info page and select 'Bark Sensitivity' from the menu. Select a sensitivity to send to the Dog Device. The Dog Device will start transmitting HD Bark Detection information.
NOTE: Once a T5 or TT15 Dog Device is in HD Bark Detection mode, it can only be tracked in Alpha mode by Alpha 100's with software version 5.40 or greater.
Astro320 tracking is not affected by HD BarkDetect selection.
WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin® for service.
Change History
Changes made from version 6.30 to 6.50:
Improved rejection of an unintended collar that has a track-only code that overlaps with that of an intended collar.
Prevent unconfirmed change ID of a collar by disabling this option until the collar is reliably tracking.
Improved enumeration of USB mass storage.
Eliminated occasional false lost-GPS message at the start of collar tracking.
France users only: Added channels 3-6. Update your collar and other handheld devices for complete compatibility.
France users only: Use letters in the share codes to allow more unique identification of collars to reduce the possibility of tracking an unintended collar.
Changes made from version 6.20 to 6.30:
Added an option to the map option menu to show and hide the map pointer.
Fixed potential invalid distances of dogs displayed by Drive Track or Fenix.
Changes made from version 6.10 to 6.20:
Improved interference handling by replacing the interference wizard with a simple interference information banner.
Improved consistency of dogs displayed by Drive Track or Fenix.
Fixed issue when a dog is removed from the dog list, especially in basestation mode.
Changes made from version 6.00 to 6.10:
Fixes battery charging.
Changes made from version 5.90 to 6.00:
Improved notification when a dog unit has lost-GPS.
Changes made from version 5.60 to 5.90:
Added broadcast of dog data (Setup > Dogs > Broadcast Dog Data > On) to support dog position tracking by [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.] and [Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.].
Changes made from version 5.60 to 5.80:
Added broadcast of dog data (Setup > Dogs > Broadcast Dog Data > On) to support dog position tracking by DriveTrack 70 and fēnix 3.
Changes made from version 5.40 to 5.60:
Improved the display of the blue pin on the map page.
Made contact messages persistent.
Added an alert tone when emergency messages are received from a contact (system tones must be enabled).
Improved interference detection.
Changes made from version 5.30 to 5.40:
Fixed issues when adding 20 dogs or contacts.
Added HD BarkDetect for units for Norway, Sweden, Finland and Denmark (see notes above).
Changes made from version 5.10 to 5.30:
Fixed issue with radio function in Belgian units.
Changes made from version 5.00 to 5.10:
Improved tracking of a collar that is shared between 2 dogs.
Don't show Collar Sleep Mode option for a T5 mini or TT15 mini that is manually added as a track-only collar.
Fixed +/- buttons on the compass page.
Changes made from version 4.70 to 5.00:
Added support for T5 mini and TT15 mini.
Improved pairing reliability.
Improved dog info page menu options ordering.
Improved display of running pointers on the dog tracker page.
Improved consistency of comm bar display on the dog info page.
Fixed potential issue where Emergency Call button was covered up on the contacts page.
Fixed potential freeze during Start New Hunt.
Fixed potential shutdown when using the data fields dashboard on the map.
Changes made from version 4.50 to 4.70:
Fixed issue when adjustment screen is displayed multiple times.
Improved handling of invalid .JNX files.
Changes made from version 4.40 to 4.50:
Improved pairing to ANT sensors.
Fixed potential issue when setting a geofence alert.
Improved compass page's transition between magnetic compass and direction-of-travel for heading.
Made time-based track interval setting accept intervals less than 30 seconds.
Changes made from version 4.30 to 4.40:
Added a new dog device tracking channel for Greece units. NOTE: the T 5 or TT 15 dog device must have version 2.50 or later software installed to use this new channel.
Fixed issues when deleting waypoints.
Fixed issues when using all 20 available tracking windows for dog devices and Alpha tracking.
Changes made from version 4.20 to 4.30:
Fixed occasional shutdown when using the map page.
Changes made from version 4.10 to 4.20:
Improved cartography support (Garmin Hunt View maps)
Improved boot time when a large amount of BirdsEye satellite imagery is present
Changes made from version 4.00 to 4.10:
Fixed possible issue with 4.00 release
Changes made from version 3.80 to 4.00:
Fixed possible issue with List Sync on dog tracker page
Changes made from version 3.70 to 3.80:
Assigns correct features for wirelessly shared dog devices.
Improved reliability of received dog device position and status.
Fixed adjustability of L/M/H stim mode slider.
Improved reliability when changing ID of a dog device
Changes made from version 3.20 to 3.70:
Added support for T 5 and TT 15 dog devices.
Added Emergency Calling feature between Alphas
Added the ability to control a VIRB through a T5 or TT15 within tracking distance. The VIRB must be near the T5 or TT15 and have Remote turned on and set to 'Main VIRB' in its settings (Main Menu > Setup > Remote). To use the feature on Alpha 100, go to Dog List > select a dog > Show Info > Menu > VIRB Control.
Fixed potential issues with stale tracking data if dog device is out of tracking range.
Fixed dog arrow orientation when map is in track up mode.
Changes made from version 3.10 to 3.20:
Disabled dog tracking when used in countries for which the radio frequencies are not authorized.
Fixed distance issue in dog track review.
Improvements to map drawing speed.
Fixed issue retrieving Public Land Survey System data from certain TOPO US 24K maps.
Changes made from version 3.00 to 3.10:
Fixed potential shutdown with large number of dogs on dog tracker page.
Changes made from version 2.90 to 3.00:
Added support for VIRB Remote. Setup > Main Menu to add. See TrailTech (http://garmin.blogs.com/softwareupdates/2013/08/VIRB-remote.html) for more information.
Added indicator on the map when a dog or contact has lost communication
Improved to show other dogs when reviewing a dog's track on the map
Fixed issue where setting a track to show on the map would not hold through a power cycle
Fixed issue where pausing all tracking would not prevent track points from being logged
Changes made from version 2.80 to 2.90:
Improve charging of a fully-depleted battery.
Changes made from version 2.70 to 2.80:
Prevent transmitting when no battery is installed.
Changes made from version 2.40 to 2.70:
Improve ability to drive accessory antennas.
Improvements to position reporting.
Changes made from version 2.30 to 2.40:
Added 'List Sync' option on the dog compass page. For multiple dog situations, this mode matches visible training dogs to visible tracking dogs.
Added 'Measure Distance' option on the map page.
Added support for new tempe sensor. See TrailTech (http://garmin.blogs.com/softwareupdates/2012/08/tempe-sensor.html) for more information.
Improved support for tracking greater than 15 dogs.
Fixed issue when setting up a user grid position format.
Fixed issue when navigating to a dog when routing is set to 'Prompted'.
Changes made from version 2.20 to 2.30:
Improved Compass autocalibration.
Fixed mark covey to correctly display numbers greater than nine.
Fixed potential shutdown when attempting to add a new geofence.
Έχει επεξεργασθεί από τον/την Santosan στις Τρι 15 Αυγ 2017 - 19:26, 24 φορές συνολικά
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.70, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 3.80, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.10, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.20, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.30, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.40, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.50, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Εχουμε αναβαθμιση στην εκδοση 4.70, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Έχουμε αναβάθμιση firm στην έκδοση 5.00, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Έχουμε αναβάθμιση firm στην έκδοση 5.10, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Έχουμε αναβάθμιση firm στην έκδοση 5.30, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Έχουμε αναβάθμιση firm στην έκδοση 5.40, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 5.60, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 5.70, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Επιστροφή του firm στην έκδοση 5.60, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 5.80, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 5.90, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.00, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.10, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.20, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.30, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.50, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.30, έχει ενημερωθεί το πρώτο post.
Έχει επεξεργασθεί από τον/την Santosan στις Τρι 15 Αυγ 2017 - 19:32, 1 φορά
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: Alpha 100 Device Firmware
Αναβάθμιση firm στην έκδοση 6.50, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Παρόμοια θέματα
» Alpha 100 Device Beta Firmware
» HRM-Run Device Firmware
» HRM-Tri Device Firmware
» HRM-Run Device Firmware
» Zumo® 660 Device Firmware
» HRM-Run Device Firmware
» HRM-Tri Device Firmware
» HRM-Run Device Firmware
» Zumo® 660 Device Firmware
Σελίδα 1 από 1
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης