epix™ Device Firmware
Σελίδα 1 από 1
epix™ Device Firmware
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of February 2, 2016
Change History
Changes made from version 3.20 to 3.40:
Fixed issue with activity data field setup drawing the incorrect data field layout.
Fixed issue with invalid elevation data being shown for map points with no known elevation data.
Fixed issue with the screen unlocking during activities and after when lock screen was set.
Fixed issues with alarm snooze not working.
Fixed possible crash when too many Connect IQ data fields are installed.
Changes made from version 3.10 to 3.20:
Fixed a potential lockup when saving or discarding an activity.
Changes made from version 2.90 to 3.10:
Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation)
Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature
Added ability to configure the map detail level. Reduce map detail level to improve map drawing speeds (Settings > Map > Detail)
Added support for Connect IQ SDK 1.2.1
Fixed issue with storm alerts
Fixed issue with foot pod dropping as speed or distance source
Changes made from version 2.80 to 2.90:
Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod)
Added the option to configure the navigation heading bug (Settings > Navigation > Heading Bug)
Added support for editing altitude and position for Saved Locations (Navigation > Saved Locations)
Added setting to control Bluetooth connection alerts (Settings > Bluetooth > Alerts)
Added support for Connect IQ SDK 1.1.4
Improved low battery notifications
Fixed issue with navigation persisting after saving/discarding an activity
Changes made from version 2.70 to 2.80:
Added Course navigation mode (Settings > Navigation > Type). An HSI Compass will be utilized on the Guide data page when navigating in this mode
Added support for Smart Notification Actions (interact with the incoming notifications directly from the pop-up or within the Notifications widget, e.g. clear a message or reject an incoming call)
Added support for trails found in ActiveRouting cartography
Added magnetic variation compass setting ( Settings > Sensors > Compass > North Ref. > User )
Improved support of edited locations from BaseCamp
Improved city spell search
Improved pace in UltraTrac
Improved map drawing performance for long activities and courses
Improved track log for open water swim activities
Fixed potential issue when loading large custom map files
Fixed a potential issue with navigating courses
Fixed an issue with utilizing the setting for Swim Stroke Type Detection
Fixed issues with Hide/Show Track Log and Hide/Show User Locations map settings
Changes made from version 2.50 to 2.70:
Added support for HRM-Tri and HRM-Swim
Added a heading dot indicator to data pages when in navigation mode
Added support for 'Auto' backlight mode (options are now available to configure backlight separately for keys, alerts and gestures: Settings > System > Backlight)
Added support for Walking sport type (Settings > Apps > Add New)
Added support for configuring LAP key behavior (Settings > Apps)
Added ability to delete all locations on device (Navigation > Saved Locations > UP (to get to bottom of list) > Delete All)
Added Back to Start option for straight-line navigation back to activity start
Added Hot Keys press-and-hold START and BACK key customization (Settings > System > Hot Keys)
Improved ascent and descent calculations
Fixed lap banner times for activities longer than one hour
Fixed issue with display of 3 digit speeds on ski data pages
Fixed issue with saving of lap ascent values
Fixed potential issue with steps being lost during an activity
Changes made from version 2.40 to 2.50:
Added power alerts setup (Settings > Apps > Select Biking App > Alerts > Add New > Power)
Added 'Find My Phone' app (found at the bottom of the app list)
Added Foot Pod auto calibration support
Improved Connect IQ download experience via Garmin Connect Mobile
Fixed potential issue with 'Resume Later' app option
Fixed issues with metronome
Changes made from version 2.30 to 2.40:
Improved GPS tracking performance (Requires GPS Software 2.90. Note: after applying GPS software updates, for best results please allow the device to track GPS signals continuously for 10 to 15 minutes. This one-time process will allow the device to re-accumulate satellite information lost in the update process)
Improved GPS distance accumulation (requires GPS Software 2.90)
Added support for Connect IQ SDK 1.1.3
Changes made from version 2.20 to 2.30:
Added support for Connect IQ SDK 1.1.2
Improved Connect IQ experience and stability
Changes made from version 2.10 to 2.20:
Improved drill log page
Fixed issue with recovery time not displaying correctly
Fixed issue with LiveTrack
Fixed issue with showing courses on the map page
Fixed potential shutdown during a workout activity
[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]
as of February 2, 2016
Change History
Changes made from version 3.20 to 3.40:
Fixed issue with activity data field setup drawing the incorrect data field layout.
Fixed issue with invalid elevation data being shown for map points with no known elevation data.
Fixed issue with the screen unlocking during activities and after when lock screen was set.
Fixed issues with alarm snooze not working.
Fixed possible crash when too many Connect IQ data fields are installed.
Changes made from version 3.10 to 3.20:
Fixed a potential lockup when saving or discarding an activity.
Changes made from version 2.90 to 3.10:
Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation)
Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature
Added ability to configure the map detail level. Reduce map detail level to improve map drawing speeds (Settings > Map > Detail)
Added support for Connect IQ SDK 1.2.1
Fixed issue with storm alerts
Fixed issue with foot pod dropping as speed or distance source
Changes made from version 2.80 to 2.90:
Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod)
Added the option to configure the navigation heading bug (Settings > Navigation > Heading Bug)
Added support for editing altitude and position for Saved Locations (Navigation > Saved Locations)
Added setting to control Bluetooth connection alerts (Settings > Bluetooth > Alerts)
Added support for Connect IQ SDK 1.1.4
Improved low battery notifications
Fixed issue with navigation persisting after saving/discarding an activity
Changes made from version 2.70 to 2.80:
Added Course navigation mode (Settings > Navigation > Type). An HSI Compass will be utilized on the Guide data page when navigating in this mode
Added support for Smart Notification Actions (interact with the incoming notifications directly from the pop-up or within the Notifications widget, e.g. clear a message or reject an incoming call)
Added support for trails found in ActiveRouting cartography
Added magnetic variation compass setting ( Settings > Sensors > Compass > North Ref. > User )
Improved support of edited locations from BaseCamp
Improved city spell search
Improved pace in UltraTrac
Improved map drawing performance for long activities and courses
Improved track log for open water swim activities
Fixed potential issue when loading large custom map files
Fixed a potential issue with navigating courses
Fixed an issue with utilizing the setting for Swim Stroke Type Detection
Fixed issues with Hide/Show Track Log and Hide/Show User Locations map settings
Changes made from version 2.50 to 2.70:
Added support for HRM-Tri and HRM-Swim
Added a heading dot indicator to data pages when in navigation mode
Added support for 'Auto' backlight mode (options are now available to configure backlight separately for keys, alerts and gestures: Settings > System > Backlight)
Added support for Walking sport type (Settings > Apps > Add New)
Added support for configuring LAP key behavior (Settings > Apps)
Added ability to delete all locations on device (Navigation > Saved Locations > UP (to get to bottom of list) > Delete All)
Added Back to Start option for straight-line navigation back to activity start
Added Hot Keys press-and-hold START and BACK key customization (Settings > System > Hot Keys)
Improved ascent and descent calculations
Fixed lap banner times for activities longer than one hour
Fixed issue with display of 3 digit speeds on ski data pages
Fixed issue with saving of lap ascent values
Fixed potential issue with steps being lost during an activity
Changes made from version 2.40 to 2.50:
Added power alerts setup (Settings > Apps > Select Biking App > Alerts > Add New > Power)
Added 'Find My Phone' app (found at the bottom of the app list)
Added Foot Pod auto calibration support
Improved Connect IQ download experience via Garmin Connect Mobile
Fixed potential issue with 'Resume Later' app option
Fixed issues with metronome
Changes made from version 2.30 to 2.40:
Improved GPS tracking performance (Requires GPS Software 2.90. Note: after applying GPS software updates, for best results please allow the device to track GPS signals continuously for 10 to 15 minutes. This one-time process will allow the device to re-accumulate satellite information lost in the update process)
Improved GPS distance accumulation (requires GPS Software 2.90)
Added support for Connect IQ SDK 1.1.3
Changes made from version 2.20 to 2.30:
Added support for Connect IQ SDK 1.1.2
Improved Connect IQ experience and stability
Changes made from version 2.10 to 2.20:
Improved drill log page
Fixed issue with recovery time not displaying correctly
Fixed issue with LiveTrack
Fixed issue with showing courses on the map page
Fixed potential shutdown during a workout activity
Έχει επεξεργασθεί από τον/την Santosan στις Σαβ 4 Φεβ 2017 - 10:16, 10 φορές συνολικά
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Εχουμε αναβαθμιση firm στην εκδοση 2.10
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Εχουμε αναβαθμιση firm στην εκδοση 2.20, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Εχουμε αναβαθμιση firm στην εκδοση 2.30, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Εχουμε αναβαθμιση firm στην εκδοση 2.40, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Εχουμε αναβαθμιση firm στην εκδοση 2.50, εχει ενημερωθει το πρωτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Έχουμε αναβάθμιση στην έκδοση 2.70, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Έχουμε αναβάθμιση στην έκδοση 2.80, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Έχουμε αναβάθμιση στην έκδοση 2.90, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Αναβάθμιση στην έκδοση 3.10, έχει ενημερωθεί το πρώτο post
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Αναβάθμιση firm στην έκδοση 3.20, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Απ: epix™ Device Firmware
Αναβάθμιση firm στην έκδοση 3.40, έχει ενημερωθεί το πρώτο post.
Santosan- Administrator
- Ηλικία : 54
Τόπος : Athens - West Side
Ημερομηνία εγγραφής : 06/10/2012
Αριθμός μηνυμάτων : 10879
Παρόμοια θέματα
» epix™ Device Beta Firmware
» PRO Control® 2 RR Device Firmware
» HRM-Run Device Firmware
» HRM-Run Device Firmware
» fenix® 3 HR Device Firmware
» PRO Control® 2 RR Device Firmware
» HRM-Run Device Firmware
» HRM-Run Device Firmware
» fenix® 3 HR Device Firmware
Σελίδα 1 από 1
Δικαιώματα σας στην κατηγορία αυτή
Δεν μπορείτε να απαντήσετε στα Θέματα αυτής της Δ.Συζήτησης