D2 Bravo Device Firmware

από **Santosan** Δευ 27 Ιουλ 2015 - 10:54

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτή την εικόνα.]

[Πρέπει να είστε εγγεγραμμένοι και συνδεδεμένοι για να δείτε αυτόν το σύνδεσμο.]

as of September 20, 2017

Notes:

WARNING: If this software is uploaded to a device other than that for which it is designed, you will not be able to operate that device.
If attempts to upload software fail, you may need to return the device to Garmin for service.

Change History

Changes made from version 3.80 to 3.90:

Fixed temperature widget interaction with Tempe sensor, and display of density altitude.
Improved error handling support for Connect IQ watchface crashes.
Updated Instrument page in FLY activity to include UTC time and altimeter data source annunciation.
Updated access to METAR/TAF data through GCM.

Changes made from version 3.70 to 3.80:

Added support for Connect IQ SDK 1.4.
Fixed support for LiveTrack Auto Start

Changes made from version 3.60 to 3.70:

Improved display of the Navigation Data expiration page.
Added support for CIQ SDK 1.3.4
Added support for LiveTrack Auto Start. Once enabled on the Garmin Connect Mobile app (More > LiveTrack), the LiveTrack session will be automatically started when the user begins an activity.
Improved the app settings editing experience.
Added support for 'Find My Watch'. (Garmin Connect Mobile App > More > Garmin Devices > Connected Device > Find My Device)
Added support for VIRB Ultra 30.
Fixed a potential issue with writing developer data through apps that support the Connect IQ 1.3 SDK.
Improved support for the new Garmin Face-It mobile app, enabling creation of a Connect IQ watch face with a photo.
Fixed a potential issue where intensity minutes would reset at midnight.
Fixed a potential issue where the track log for an activity was not being shown in Garmin Connect.
Fixed a potential issue where users VO2 max and Performance Condition values were getting affected with non-Run and Bike activities. (Ex: Walk, Hike, SUP etc.)

Changes made from version 3.50 to 3.60:

Improved overall stability while in an activity.
Improved Speed alerts within the Fly activity to support speeds up to 990kts.
Fixed showing nautical units for non-flying activity summaries.
Added support for Connect IQ 1.3.0 SDK. See the Connect IQ 1.3.0 SDK for a list of new features.
Added support for Apple Media Service - users can now control any active music player, e.g. Spotify, as well as volume. (requires iOS 8.0 and higher).
Added support for phone apps to subscribe for more frequent data updates.
Fixed an issue where Last Run/Swim/Ride widgets could appear blank.
Fixed military time setting getting overwritten when syncing from Connect.

Changes made from version 3.40 to 3.50:

Fixed high battery drain when using a ConnectIQ watch face and paired to a phone.
Added notification of FPL transfer failure via Garmin Pilot due to full storage.
Improved display of distances greater than 999 mi. or km.
Added support for accessing other data screens while in a swim workout rest interval.
Improved accuracy of distance and lap counting for Pool Swim.
Improved the reliability of foot pod calibration.
Improved ETA and ETE estimates when navigating a (non-flying) course.
Improved label and background consistency across all widgets.
Fixed an issue where Project Waypoint was not using the system setting for bearing units. (Settings > Sensors > Compass > Display)
Fixed a potential issue where VO2 Max and Lactate Threshold estimates were being used incorrectly with Trail Run activities.
Fixed an issue where distance data fields for SUP were using incorrect precision and units.
Fixed a potential issue with high battery drain in watch mode.
Fixed a potential issue where the user was not given a warning alert on the last length of a swim workout.
Fixed a potential issue where certain multisport profiles were not available in the app list when navigating a course.
Fixed a potential display issue with one of the analog watch faces. (Requires Display update 3.50)

Changes made from version 3.30 to 3.40:

Added flight plan transfer support from Garmin Pilot (requires PilotSync Connect IQ app and Garmin Pilot for Android v5.3 or iOS v8.3)
Added current UTC/Zulu time to TAF page
Added support for showing more than 100 waypoints (Navigation > Saved Locations)
Added support for setting backlight brightness to 5%
Added a goal alert setting (Settings > Activity Tracking > Goal Alert)
Added swim workout support
Added ability to see achievements after saving an activity
Fixed ETE and ETA to be based on current speed instead of average
Fixed glide ratio and vert. dist. to destination fields while navigating flight plans
Fixed light key not working on Nav. Data acceptance screen
Fixed not downloading EPO data over Wifi

Changes made from version 3.10 to 3.30:

Fixed long TAF reports causing instability and incorrect clock time

Changes made from version 2.70 to 3.10:

Added support for TAF on the METAR widget.
Added support for entering custom tail number on aviation watch face. (Settings > Watch Face > Tail Number)
Added new watch face styles.
Added support for Golf App. Download courses through Garmin Connect Mobile.
Added support for Jumpmaster App.
Added support for Tactical App.
Added support for Project Waypoint App.
Added support for Standup Paddleboarding (SUP) App.
Added support for Row App.
Added support for Row Indoor App.
Added support for Stress Score App.
Added support for 'Dual Grid' hot key option.
Added support for WiFi hot key option.
Added Do Not Disturb feature and Auto Do Not Disturb (press & hold LIGHT; setup Auto DND through Garmin Connect Mobile).
Added several new widgets, including Calories, Intensity Minutes, Last Sport, Golf, and My Day.
Added Steps widget with floors climbed. This replaces the previous Wellness widget. Sleep mode is now automatic but can be entered manually through Settings > Activity Tracking.
Added support for Advanced Running Dynamics metrics. Requires HRM-Run v6.60 or HRM-Tri v4.20.
Added support for Connect IQ 1.2.6.
Added support for Intensity Minutes goals. Requires a connection to a heart rate strap to accrue Vigorous minutes.
Added preview for backlight brightness.
Added support for audio alerts in Garmin Connect Mobile.
Improved the Auto-Fly algorithm.
Improved the colors used for sensor bar status icons.
Fixed METAR widget wind speed units.
Fixed potential issue with battery drain when using Analog watch faces. (Requires display update 3.20)
Fixed potential issue with display of day/month on the watch face. (Requires display update 3.20)

Changes made from version 2.50 to 2.70:

Added support for Connect IQ SDK 1.2.1.
Added ability to create Flight Plan (course) on device using saved locations, nearest airports, or entering ICAO identifier.
Fixed WPT page to correctly update title for multipoint courses.
Fixed WPT page to correctly update bearing.
Improved CDI and off course behavior for flight plans.
Fixed To/From arrow when flying past your destination.
Added Ascent and Descent elevation alerts (Settings > Apps > Alerts > Elevation).
Added support for 'repeating' sports in a multisport profile (Settings > Apps > Multi Sport Profile > Repeat). This is useful for events such as 'Swimrun'. (https://en.wikipedia.org/wiki/Swimrun).
Added support for on device course creation (Navigation > Courses). New data fields such as next waypoint, distance to next waypoint, ETA to next waypoint, ETE to next waypoint etc. were introduced in conjunction with this feature.
Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
Improved consistency and accuracy of altimeter auto calibration (performed during a GPS activity). Notes: GPS and manual calibration points will be used to determine the best overall calibration possible. A secondary step when acquiring a GPS fix at activity start will help denote a more accurate fix for altitude purposes (yellow to green ring indication). Settings > Sensors > Altimeter > Auto Cal. is now an On/Off setting as the 'Once' and 'Continuous' settings are no longer necessary. Use Settings > Sensors > Altimeter > Calibrate to calibrate the Altimeter to a known altitude.
Improved altimeter and barometer accuracy in watch mode (when not performing a GPS activity). Note: use Settings > Sensors > Altimeter > Calibrate or press START from the Altimeter widget to calibrate the Altimeter to a known altitude.
Improved vibration profiles to be differentiated based on alert type.
Improved reliability of 'Weather' widget on iOS.
Improved ability to detect time zone changes without a GPS fix (requires connection to Garmin Connect Mobile app and time set to 'Auto' on device, Settings > System > Time > Set Time).
Improved activity tracking step calculation accuracy for certain use cases.
Fixed potential issue with a Foot Pod sensor dropping out as a source for speed.
Fixed an issue where key presses would not work, if a low battery notification was received when the unit was locked.
Fixed potential issue with manual altimeter calibration during a GPS activity.
Fixed issue with Tempe sensor connectivity.
Fixed a potential issue with exiting the 'Find Phone' app.
Fixed a potential issue with storm alerts not working in certain use cases.
Fixed a potential issue with a Foot Pod sensor being incorrectly used as the source for distance accrual.
Fixed issue with storing a large number of saved locations.
Fixed potential issue with unexpected battery drain.
Fixed potential issue reconnecting to ANT+ sensors.

Changes made from version 2.40 to 2.50:

Fixed potential shutdown during Fly activity when hundreds of nautical miles from an aviation database point
Fixed Altitude/Elevation text for configurable data field titles
Fixed GPS-based vertical speed (requires GPS firmware version 3.00)
Fixed METAR widget wind speed units to be based on Nautical Speed setting.
Added new Hands and Background analog watch face options (requires Display firmware version 2.90).
Fixed a potential issue with Footpod being incorrectly used as the source for distance accrual.
Fixed potential issue when receiving a large number of notifications using iOS 9.

Changes made from version 2.30 to 2.40:

Improved accuracy for waypoint distances in Fly activity.
Added WPT page to Fly activity loop for user defined waypoints
Improved Fly Navigation off-course behavior
Corrected unit conversion error in METAR widget
Changed HSI tick marks to 10 degrees from 15 degrees
Enabled users to edit saved waypoints
Improved step count accuracy
Added ability to configure foot pod speed and distance (Settings > Sensors > Foot Pod).
Added support for setting up compass user magnetic variation (Settings > Sensors > Compass > North Ref.).
Added support for Smart Notification Actions (interact with the incoming notifications directly from the pop-up or within the Notifications widget, e.g. clear a message or reject an incoming call).
Added 'Find My Phone' app (added at the end of the app list).
Added support for advanced VIRB remote (compatible with VIRB X/XE: control camera settings, display additional status information).
Added support for HRM-Tri and HRM-Swim.
Added advanced alarm clock features (multiple alarms, recurring options, notification customization).
Added support for 'Auto' backlight mode (options are now available to configure backlight separately for keys, alerts and gestures: Settings > System > Backlight).
Added setting to control Bluetooth connection alerts (Settings > Bluetooth > Alerts).
Improved GPS tracking performance (Requires GPS Software 2.90. Note: after applying GPS software updates, for best results please allow the device to track GPS signals continuously for 10 to 15 minutes. This one-time process will allow the device to re-accumulate satellite information lost in the update process).
Added support for Connect IQ SDK 1.1.3.
Minor bug fixes and improvements

Changes made from version 2.20 to 2.30:

Fixed an issue with maintaining the map zoom scale while scrolling through timer pages in a Fly activity.
Fixed a potential issue with the HSI compass CDI bar.
Fixed a potential issue with the day indication failing to update on the watch face.

από **Santosan** Παρ 31 Ιουλ 2015 - 19:36

Έχουμε αναβάθμιση στην έκδοση 2.30, έχει ενημερωθεί το πρώτο post.

από **Santosan** Σαβ 10 Οκτ 2015 - 10:50

Έχουμε αναβάθμιση στην έκδοση 2.40, έχει ενημερωθεί το πρώτο post.

από **Santosan** Πεμ 19 Νοε 2015 - 19:49

Έχουμε αναβάθμιση στην έκδοση 2.50, έχει ενημερωθεί το πρώτο post.

από **Santosan** Σαβ 16 Ιαν 2016 - 7:44

Αναβάθμιση firm στην έκδοση 2.50, έχει ενημερωθεί το πρώτο post.

από **Santosan** Τετ 18 Μάης 2016 - 10:36

Αναβάθμιση firm στην έκδοση 3.10, έχει ενημερωθεί το πρώτο post.

από **Santosan** Σαβ 4 Ιουν 2016 - 10:14

Αναβάθμιση firm στην έκδοση 3.30, έχει ενημερωθεί το πρώτο post.

από **Santosan** Τρι 14 Ιουν 2016 - 10:23

Αναβάθμιση firm στην έκδοση 3.40, έχει ενημερωθεί το πρώτο post.

από **Santosan** Τετ 13 Ιουλ 2016 - 20:26

Αναβάθμιση firm στην έκδοση 3.50, έχει ενημερωθεί το πρώτο post.

από **Santosan** Κυρ 25 Σεπ 2016 - 19:18

Aναβάθμιση firm στην έκδοση 3.60, έχει ενημερωθεί το πρώτο post.

από **Santosan** Τετ 9 Νοε 2016 - 18:43

Aναβάθμιση firm στην έκδοση 3.70, έχει ενημερωθεί το πρώτο post.

από **Santosan** Παρ 6 Ιαν 2017 - 19:55

Aναβάθμιση firm στην έκδοση 3.80, έχει ενημερωθεί το πρώτο post.

από **Santosan** Παρ 22 Σεπ 2017 - 11:12

Aναβάθμιση firm στην έκδοση 3.90, έχει ενημερωθεί το πρώτο post.

D2 Bravo Device Firmware

D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware

Απ: D2 Bravo Device Firmware